Oil seal KC9 46x62x8/14 NBR front wheel hub inner of Chevrolet Daewoo OEM 9631676
OEM:96316761
CORTECO: 19036047B
SIE: 46*62*8/14
Product Description
KDIK Oil Seal 96316761 OEM Number Original CORTECO 19036047B
OEM:96316761
CORTECO: 19036047B
SIE: 46*62*8/14
CHARMANT A | ||||
Differential | OEM | Payen No. | Size | Material |
Pinion | 90311-38124 | NJ017 | 38x65x12x19 | NBR |
Transmission | OEM | Payen No. | Size | Material |
Front | 90311-25141 | NJ118 | 25x38x7 | NBR |
Rear | 90311-32086 | NJ606 | 32x52x11 | NBR |
Wheel End | OEM | Payen No. | Size | Material |
Front | 90043-11206 | NJ011 | 40x52x7 | FPM |
Front | 90311-41123 | NJ104 | 41x53x7 | NBR |
Front | 90311-41123 | NJ104 | 41x53x7 | NBR |
Rear | 90311-42055 | NJ052 | 42x55x7 | NBR |
COPEN | ||||
Transaxle (MTM) | OEM | Payen No. | Size | Material |
Input Shaft | 90043-10035-000 | NJ751 | 25x35x6 | NBR |
CUORE | ||||
Engine Related | OEM | Payen No. | Size | Material |
Camshaft | 90043-11109 | NJ268 | 32x48x7 | NBR |
Camshaft | 90043-11109 | NJ268 | 32x48x7 | NBR |
Crankshaft (Rear) | 90043-11222 | NJ269 | 58x74x10 | ACM |
Crankshaft (Rear) | 90043-11095 | NJ269 | 58x74x10 | ACM |
Crankshaft (Rear) | 90043-11222 | NJ269 | 58x74x10 | ACM |
Crankshaft (Rear) | 90043-11095 | NJ269 | 58x74x10 | ACM |
Crankshaft (Rear) | 90043-11095 | NJ269 | 58x74x10 | ACM |
Crankshaft (Rear) | 90043-11222 | NJ269 | 58x74x10 | ACM |
Timing Cover | 90043-11109 | NJ268 | 32x48x7 | NBR |
Timing Cover | 90043-11109 | NJ268 | 32x48x7 | NBR |
Timing Cover | 90043-11207 | NK138 | 38x52x11 | ACM |
CUORE L | ||||
Differential | OEM | Payen No. | Size | Material |
Pinion | 90043-11105 | NJ667 | 35x68x9x15.5 | NBR |
Pinion | 90043-11153 | NJ667 | 35x68x9x15.5 | NBR |
Wheel End | OEM | Payen No. | Size | Material |
Front (Inner) | 90043-11106 | NJ766 | 40x64x16 | NBR |
Front (Outer) | 90043-11111 | NJ413 | 45x63x7 | NBR |
Front (Outer) | 90043-11150 | NJ413 | 45x63x7 | NBR |
Rear (Inner) | 90043-10020 | NJ726 | 30x42x8 | NBR |
DELTA | ||||
Differential | OEM | Payen No. | Size | Material |
Pinion | 90043-11077-000 | NJ647 | 50x82x12 | NBR |
Pinion | 90043-11077-000 | NJ647 | 50x82x12 | NBR |
Pinion | 90043-11077-000 | NJ647 | 50x82x12 | NBR |
Engine Related | OEM | Payen No. | Size | Material |
Crankshaft (Rear) | 90311-80001 | NJ030 | 80x100x12 | ACM |
Crankshaft (Rear) | 90311-95001 | NJ240 | 95x115x12 | MVQ |
Crankshaft (Rear) | 90311-95008 | NK216 | 95x115x9.5 | MVQ |
Crankshaft (Rear) | 90043-11076-000 | NJ098 | 95x110x11 | MVQ |
Timing Cover | 90311-38013 | NJ102 | 38.5x58x11 | NBR |
Timing Cover | 90311-45002 | NJ243 | 45x68x12 | NBR |
Timing Cover | 90311-50006 | NJ239 | 50x72x12 | NBR |
Timing Cover | 90311-50013 | NK217 | 50x72x9 | ACM |
Timing Cover | 90043-11112-000 | NJ276 | 45x62x9 | NBR |
Timing Cover | 90043-11022-000 | NJ096 | 38x55x8 | NBR |
Transmission | OEM | Payen No. | Size | Material |
Extension Housing | 90311-45001 | NJ261 | 45x62x9 | NBR |
Extension Housing | 90043-11066-000 | NJ405 | 40x62x12 | NBR |
Extension Housing | 90311-45001 | NJ261 | 45x62x9 | NBR |
Extension Housing | 90043-11100-000 | NJ456 | 45x62x9 | NBR |
DELTA (continued) | ||||
Transmission | OEM | Payen No. | Size | Material |
Extension Housing | 90043-11100-000 | NJ456 | 45x62x9 | NBR |
Extension Housing | 90311-45001 | NJ261 | 45x62x9 | NBR |
Extension Housing | 90311-48011 | NK052 | 48x62x9 | ACM |
Front | 90311-28004 | NJ439 | 28.6x43x6.5 | NBR |
Front | 90311-32106 | NJ268 | 32x48x7 | NBR |
Front | 90043-11141-000 | NJ454 | 30x45x8 | NBR |
Front | 90311-28004 | NJ439 | 28.6x43x6.5 | NBR |
Front | 90311-32106 | NJ268 | 32x48x7 | NBR |
Front | 90043-11141-000 | NJ454 | 30x45x8 | NBR |
Front | 90043-11141-000 | NJ454 | 30x45x8 | NBR |
Front | 90311-32106 | NJ268 | 32x48x7 | NBR |
Front | 90311-32012 | NK048 | 32x53x7 | ACM |
Wheel End | OEM | Payen No. | Size | Material |
Front | 43441-87303-000 | NK019 | 40x82x14 | NBR |
Front | 90043-11102-000 | NJ390 | 68x88x10 | NBR |
Rear (Inner) | 90043-10030-000 | NJ412 | 45x62x9 | NBR |
Rear (Inner) | 90043-11053-000 | NJ385 | 70x112x14x20 | NBR |
Rear (Inner) | 90043-11053-000 | NJ385 | 70x112x14x20 | NBR |
Rear (Inner) | 90043-10030-000 | NJ412 | 45x62x9 | NBR |
Rear (Inner) | 90043-11053-000 | NJ385 | 70x112x14x20 | NBR |
Rear (Inner) | 90043-10030-000 | NJ412 | 45x62x9 | NBR |
Rear (Inner) | 90043-11053-000 | NJ385 | 70x112x14x20 | NBR |
Rear (Outer) | 90043-11060-000 | NJ455 | 63x80x9 | NBR |
Rear (Outer) | 90043-12023-000 | NJ668 | 55x101x4.7 | NBR |
Rear (Outer) | 90043-11060-000 | NJ455 | 63x80x9 | NBR |
Rear (Outer) | 90043-12023-000 | NJ668 | 55x101x4.7 | NBR |
Rear (Outer) | 90043-11060-000 | NJ455 | 63x80x9 | NBR |
Rear (Outer) | 90043-12023-000 | NJ668 | 55x101x4.7 | NBR |
HIJET / ATRAI | ||||
Differential | OEM | Payen No. | Size | Material |
Pinion | 90043-11198-000 | NJ648 | 30x55x12 | NBR |
Pinion | 90043-11198-000 | NJ648 | 30x55x12 | NBR |
Engine Related | OEM | Payen No. | Size | Material |
Camshaft | 90043-11109-000 | NJ268 | 32x48x7 | NBR |
Camshaft | 90043-11207-000 | NK138 | 38x52x11 | ACM |
Crankshaft (Rear) | 90043-11283-000 | NJ269 | 58x74x10 | ACM |
Timing Cover | 90043-11109-000 | NJ268 | 32x48x7 | NBR |
Transmission | OEM | Payen No. | Size | Material |
Extension Housing | 90043-11098-000 | NJ727 | 31x41x10 | ACM |
Extension Housing | 90043-11098-000 | NJ727 | 31x41x10 | ACM |
Extension Housing | 90043-11098-000 | NJ727 | 31x41x10 | ACM |
Front | 90043-10035-000 | NJ751 | 25x35x6 | NBR |
Wheel End | OEM | Payen No. | Size | Material |
Front | 90311-40108 | NJ011 | 40x52x7 | FPM |
HIJET / ATRAI (continued) | ||||
Wheel End | OEM | Payen No. | Size | Material |
Front | 90311-40108 | NJ011 | 40x52x7 | FPM |
Front (Inner) | 90043-11134-000 | NK303 | 44x63x13 | NBR |
Rear | 90043-10055-000 | NJ726 | 30x42x8 | NBR |
Rear | 90043-10055-000 | NJ726 | 30x42x8 | NBR |
INNOCENTI | ||||
Engine Related | OEM | Payen No. | Size | Material |
Timing Cover | 90043-11207 | NK138 | 38x52x11 | ACM |
LEEZA / OPTI | ||||
Engine Related | OEM | Payen No. | Size | Material |
Camshaft | 90043-11207-000 | NK138 | 38x52x11 | ACM |
Crankshaft (Rear) | 90043-11283-000 | NJ269 | 58x74x10 | ACM |
Crankshaft (Rear) | 90043-11283-000 | NJ269 | 58x74x10 | ACM |
Transaxle (ATM) | OEM | Payen No. | Size | Material |
Differential Side (Front) (LH) | 90043-11234-000 | NJ667 | 35x68x9x15.5 | NBR |
Differential Side (Front) (LH) | 90043-11234-000 | NJ667 | 35x68x9x15.5 | NBR |
Differential Side (Front) (RH) | 90043-11234-000 | NJ667 | 35x68x9x15.5 | NBR |
Differential Side (Front) (RH) | 90043-11234-000 | NJ667 | 35x68x9x15.5 | NBR |
Transaxle (MTM) | OEM | Payen No. | Size | Material |
Differential Side (Front) (LH) | 90043-11234-000 | NJ667 | 35x68x9x15.5 | NBR |
Differential Side (Front) (LH) | 90043-11260-000 | NK301 | 39x68x9x15.5 | NBR |
Differential Side (Front) (RH) | 90043-11234-000 | NJ667 | 35x68x9x15.5 | NBR |
Differential Side (Front) (RH) | 90043-11271-000 | NK302 | 39x68x16x22.5 | NBR |
Input Shaft | 90043-10035-000 | NJ751 | 25x35x6 | NBR |
Wheel End | OEM | Payen No. | Size | Material |
Front (Inner) | 90043-11134-000 | NK303 | 44x63x13 | NBR |
Rear | 90043-10055-000 | NJ726 | 30x42x8 | NBR |
MAX | ||||
Transaxle (MTM) | OEM | Payen No. | Size | Material |
Input Shaft | 90043-10035-000 | NJ751 | 25x35x6 | NBR |
MIRA / CUORE | ||||
Engine Related | OEM | Payen No. | Size | Material |
Camshaft | 90043-11109-000 | NJ268 | 32x48x7 | NBR |
Camshaft | 90043-11207-000 | NK138 | 38x52x11 | ACM |
Crankshaft (Rear) | 90043-11283-000 | NJ269 | 58x74x10 | ACM |
Crankshaft (Rear) | 90043-11283-000 | NJ269 | 58x74x10 | ACM |
Crankshaft (Rear) | 90043-11283-000 | NJ269 | 58x74x10 | ACM |
Timing Cover | 90043-11109-000 | NJ268 | 32x48x7 | NBR |
MIRA / CUORE (continued) | ||||
Transaxle (ATM) | OEM | Payen No. | Size | Material |
Differential Side (Front) (LH) | 90043-11234-000 | NJ667 | 35x68x9x15.5 | NBR |
Differential Side (Front) (LH) | 90043-11234-000 | NJ667 | 35x68x9x15.5 | NBR |
Differential Side (Front) (RH) | 90043-11234-000 | NJ667 | 35x68x9x15.5 | NBR |
Differential Side (Front) (RH) | 90043-11234-000 | NJ667 | 35x68x9x15.5 | NBR |
Transaxle (MTM) | OEM | Payen No. | Size | Material |
Differential Side (Front) (LH) | 90043-11260-000 | NK301 | 39x68x9x15.5 | NBR |
Differential Side (Front) (LH) | 90043-11260-000 | NK301 | 39x68x9x15.5 | NBR |
Differential Side (Front) (LH) | 90043-11234-000 | NJ667 | 35x68x9x15.5 | NBR |
Differential Side (Front) (RH) | 90043-11271-000 | NK302 | 39x68x16x22.5 | NBR |
Differential Side (Front) (RH) | 90043-11271-000 | NK302 | 39x68x16x22.5 | NBR |
Differential Side (Front) (RH) | 90043-11234-000 | NJ667 | 35x68x9x15.5 | NBR |
Input Shaft | 90043-10035-000 | NJ751 | 25x35x6 | NBR |
Wheel End | OEM | Payen No. | Size | Material |
Front (Inner) | 90043-11134-000 | NK303 | 44x63x13 | NBR |
Front (Inner) | 90043-11134-000 | NK303 | 44x63x13 | NBR |
Front (Inner) | 90043-11106-000 | NJ766 | 40x64x16 | NBR |
Front (Inner) | 90043-11134-000 | NK303 | 44x63x13 | NBR |
Front (Inner) | 90043-11134-000 | NK303 | 44x63x13 | NBR |
Front (Outer) | 90043-11150-000 | NJ413 | 45x63x7 | NBR |
Rear (Inner) | 90043-10055-000 | NJ726 | 30x42x8 | NBR |
Rear (Inner) | 90043-10055-000 | NJ726 | 30x42x8 | NBR |
MIRA GINO | ||||
Transaxle (MTM) | OEM | Payen No. | Size | Material |
Input Shaft | 90043-10035-000 | NJ751 | 25x35x6 | NBR |
MOVE / MOVE LATTE | ||||
Engine Related | OEM | Payen No. | Size | Material |
Crankshaft (Rear) | 90043-11283-000 | NJ269 | 58x74x10 | ACM |
Transaxle (MTM) | OEM | Payen No. | Size | Material |
Differential Side (Front) (LH) | 90043-11260-000 | NK301 | 39x68x9x15.5 | NBR |
Differential Side (Front) (RH) | 90043-11271-000 | NK302 | 39x68x16x22.5 | NBR |
Input Shaft | 90043-10035-000 | NJ751 | 25x35x6 | NBR |
Wheel End | OEM | Payen No. | Size | Material |
Front (Inner) | 90043-11134-000 | NK303 | 44x63x13 | NBR |
MUDGET II | ||||
Engine Related | OEM | Payen No. | Size | Material |
Crankshaft (Rear) | 90043-11283-000 | NJ269 | 58x74x10 | ACM |
MUDGET II (continued) | ||||
Transmission (MTM) | OEM | Payen No. | Size | Material |
Front Cover | 90043-10035-000 | NJ751 | 25x35x6 | NBR |
Wheel End | OEM | Payen No. | Size | Material |
Front | 90311-40108 | NJ011 | 40x52x7 | FPM |
NAKED | ||||
Engine Related | OEM | Payen No. | Size | Material |
Crankshaft (Rear) | 90043-11283-000 | NJ269 | 58x74x10 | ACM |
Transaxle (MTM) | OEM | Payen No. | Size | Material |
Input Shaft | 90043-10035-000 | NJ751 | 25x35x6 | NBR |
PYZAR | ||||
Engine Related | OEM | Payen No. | Size | Material |
Crankshaft (Front) | 90043-11345-000 | NK209 | 34x48x5 | NBR |
Crankshaft (Rear) | 90311-80003 | NJ360 | 80x100x8.5 | MVQ |
Crankshaft (Rear) | 90311-80012 | NJ360 | 80x100x8.5 | MVQ |
Transaxle (MTM) | OEM | Payen No. | Size | Material |
Engine Side | 90043-11147-000 | NJ921 | 45x68x12.5x19 | NBR |
Input Shaft | 90043-10035-000 | NJ751 | 25x35x6 | NBR |
Side | 90043-11228-000 | NJ768 | 45x80x10x16.5 | ACM |
ROCKY | ||||
Engine Related | OEM | Payen No. | Size | Material |
Crankshaft (Front) | 90043-11345-000 | NK209 | 34x48x5 | NBR |
Crankshaft (Rear) | 90311-80003 | NJ360 | 80x100x8.5 | MVQ |
Transmission (ATM) | OEM | Payen No. | Size | Material |
Front Oil Pump | 90311-38020 | NJ891 | 38x55x8.5 | MVQ |
Transmission (MTM) | OEM | Payen No. | Size | Material |
Front Cover | 90043-10035-000 | NJ751 | 25x35x6 | NBR |
Wheel End | OEM | Payen No. | Size | Material |
Front | 90043-11251-000 | NK264 | 42x55x7.5x9 | NBR |
Rear (Inner) | 90311-52059 | NJ068 | 52x65x9 | NBR |
STORIA | ||||
Engine Related | OEM | Payen No. | Size | Material |
Crankshaft (Rear) | 90043-11283-000 | NJ269 | 58x74x10 | ACM |
Transaxle (MTM) | OEM | Payen No. | Size | Material |
Input Shaft | 90043-10035-000 | NJ751 | 25x35x6 | NBR |
TAFT / RUGGER | ||||
Engine Related | OEM | Payen No. | Size | Material |
Crankshaft (Rear) | 90043-11076-000 | NJ098 | 95x110x11 | MVQ |
Crankshaft (Rear) | 90043-11042-000 | NJ273 | 60x82x9 | NBR |
Timing Cover | 90311-38013 | NJ102 | 38.5x58x11 | NBR |
Timing Cover | 90043-11112-000 | NJ276 | 45x62x9 | NBR |
Timing Cover | 90043-11001-000 | NJ274 | 35x55x11 | NBR |
TAFT / RUGGER (continued) | ||||
Transfer Case | OEM | Payen No. | Size | Material |
Rear Output | 90043-11066-000 | NJ405 | 40x62x12 | NBR |
Rear Output | 90043-16005-000 | NJ669 | 45x62x11 | NBR |
Transmission | OEM | Payen No. | Size | Material |
Front | 90043-11141-000 | NJ454 | 30x45x8 | NBR |
Wheel End | OEM | Payen No. | Size | Material |
Front | 90043-11080-000 | NJ258 | 55x78x12 | NBR |
Front | 90043-11080-000 | NJ258 | 55x78x12 | NBR |
Rear (Inner) | 90311-52059 | NJ068 | 52x65x9 | NBR |
TERIOS | ||||
Engine Related | OEM | Payen No. | Size | Material |
Crankshaft (Front) | 90043-11345-000 | NK209 | 34x48x5 | NBR |
Crankshaft (Rear) | 90043-11283-000 | NJ269 | 58x74x10 | ACM |
Crankshaft (Rear) | 90311-80003 | NJ360 | 80x100x8.5 | MVQ |
Transmission (MTM) | OEM | Payen No. | Size | Material |
Front Cover | 90043-10035-000 | NJ751 | 25x35x6 | NBR |
YRV | ||||
Transaxle (MTM) | OEM | Payen No. | Size | Material |
Input Shaft | 90043-10035-000 | NJ751 | 25x35x6 | NBR |
FAQ
1. Why more and more customers choose Xingtai Honglei Seal Manufacturing Co., Ltd. (KDIK OIL SEAL)?
We are specialized in the manufacturing and exporting of high quality seals. Choose us is to choose the rest assured.
We mainly produces various types, specifications, models of the seals of high precision mechanical components. We have all the specifications of what you need to help you achieve one-stop shopping, save time, effort and worry.
We has long been a domestic and international numerous oil seal mould supply business of manufacturer, service for 18 years, we have professional talents and product research and development equipment, our research and development ability, is the domestic first-class oil seal manufacturer home.
We provide one-stop sealing solutions, and provide a full range of services, from product design, mold development, stamping skeleton, vulcanization molding, clip, screening and packaging. The entire process would take a shorter, more stable quality.
2. Are you trading company or Manufacturing factory?
We are professional oil seal manufacture for 18 years in China.
3. What is your packing?
Paper roller: 10pcs in one roller, 200 rollers in one carton
PP bag: 50 or 100pcs in one bag,15 or 30 bags in one carton
Box: 1pc in a box
According to customer's request.
4. Date of Delivery
1-2 days if goods in stock.
10-15 days if goods out of stock with molding.
25-30 days if goods out of stock without molding.
5. Payment Term:
30% T/T in advance and 70% balance paid before shipment.
T/T transfer
Western Union
Paypal
others for discussion
6. Can you produce according to the samples?
We have our own brand of KDIK.
We accept ODM and OEM at the same time.We have the ability to provide the sample of the products of decomposition, develop the mould, for production.
7. How do you make our business long-term and good relationship?
We will continue to improve the process control, and improve the quality of our products and work to reduce operating costs and provide a competitive price for customers, to ensure that customers benefit
We seriously treat every customer, in good faith with them to do business, make friends, no matter how much volume, we will provide a full range of services, one-stop sealed solution.